PRECISION
ICP® ACCELEROMETERS
• Excellent long-term stability and
accuracy
• Impervious to base strain and thermal
transient errors
• Ideal for general purpose use
• Low noise floor imparts high resolution
• Ideal for low-amplitude vibration
measurements
|
 |
 |
 |
 |
| 353B16 |
353B18 |
352C23 |
352C44 |
10 mV/g
1 mV/(m/s2)
0.7 Hz∼20k Hz
1.5 grams |
10
mV/g
1 mV/(m/s2)
0.7 Hz∼18k Hz
2.3 grams |
5 mV/g
0.5 mV/(m/s2)
1.5 ∼15k Hz
0.2 grams |
100 mV/g
10 mV/(m/s2)
0.5 ∼10k Hz
3 grams
Ground isolated |
 |
 |
 |
| 352C68 |
352A21 |
352C03 |
352C33 |
100 mV/g
10 mV/(m/s2)
0.3 Hz∼12k Hz
2 grams |
100 mV/g
10 mV/(m/s2)
0.3 Hz∼12k Hz
0.6 grams |
10 mV/g
1 mV/(m/s2)
0.3 Hz∼15k Hz
5.8 grams |
100 mV/g
10 mV/(m/s2)
0.3 Hz∼15k Hz
5.8 grams |
|
| |
|
 結構測試加速規 |
 MODAL
ARRAY VIBRATION SENSING SYSTEMS
- Simplify and Expedite Large- Channel
Modal Tests
- Intelligent Cable Management
Reduces Tangles
- Innovative Sensor Mounting Technique
Speeds Installation and Channel
Verification
- Transducer Electronic Data Sheet
(TEDS), Optional EPROM within Sensor
Stores Calibration Information for
Simplified Channel Management (Complies
with IEEE P1451.4)
- Ideal for Body-In-White and Aerospace
GVT
|
| |
| |
| |
STRUCTURAL
TEST ICP® ACCELEROMETERS
- Convenient installation
configurations
- Lowest cost per channel
- Optional TEDS “smart” sensor
(IEEE P1451.4) compatibility
- Supported with a wide variety
of available patch panels,
multichannel signal conditioners,
and bank switching systems
|
 |
 |
| 333B32 |
333B52 |
333B
|
100 mV/g
10 mV/(m/s2)
0.5 Hz∼3000 Hz
Mounts on any face |
1000 mV/g
102 mV/(m/s2)
0.5 Hz∼3000 Hz
Mounts on any face |
100 mV/g
10 mV/(m/s2)
2 Hz∼1k Hz
Plug-in socket |
|
|
| TRIAXIAL
ICP® ACCELEROMETERS FOR STRUCTURAL
TESTING |
 |
 |
| 356A16 |
356B18 |
100 mV/g
10 mV/(m/s2)
0.3 Hz∼6 k Hz
9.3 grams |
1000 mV/me
102 mV/(m/s2)
0.3 Hz∼5000 Hz
25 grams |
|
| |
ACCELEROMETERS
FOR AEROSPACE TESTING
- MIMO (Multiple Input / Multiple
Output) Modal Analysis
- GVT (Ground Vibration Testing)
- Flight-Qualified Vibration
Sensors
- Aerospace Vehicle Structural
Testing
- Cryogenic Pump Vibration
Testing
- Structural Integrity Tests
- Flight Flutter
|
|
| |
|
| |
| |
|
|
低頻加速規 |
|
| |
|
SEISMIC
ICP® ACCELEROMETERS
- Structural Testing of Bridges
and Civil Structures
- Floor and Foundation Vibration
Monitoring
- Semiconductor Manufacturing
- Earthquake Detection
- Building Vibration Monitoring
- Optical Instruments and
Robotics
- Site Surveys for Sensitive
Equipment or Processes
|
 |
|
| |
FEATURES
AND BENEFITS OF SEISMIC ICP® ACCELEROMETERS
- Detect the slightest motion with
highly sensitive sensing elements
- Sensitivities from 1000 mV/g
to 10 V/g 100 mV/(m/s2) to 1 V/(m/s2)
- Measurements as low as 0.000001
g 0.0000098 m/s2
|
| |
 |
 |
 |
| 393B05 |
393A03 |
393B31 |
10 V/g
1.0 V/(m/s2)
0.5∼750 Hz
4μg resolution |
1000 mV/g
100 mV/(m/s2)
0.3∼4000 Hz
10μg resolution |
10 V/g
1.0 V/(m/s2)
0.07∼300 Hz
1μg resolution |
|
| |
| |
| |
|
三軸向加速規
|
| |
TRIAXIAL
ICP® ACCELEROMETERS
- Highly sensitive shear-mode sensing
elements
- Measurements from 0.00004 to
500 g
|
 |
 |
 |
 |
| 354C10 |
356B21 |
356A33 |
356A15 |
10 mV/g
1 mV/(m/s2)
2 Hz∼8000 Hz
Thru-Hole Mounting
5 grams |
10 mV/g
1 mV/(m/s2)
2 Hz∼10k Hz
4 grams |
10 mV/g
1 mV/(m/s2)
2 Hz∼7k Hz
5.3 grams |
100 mV/g
10 mV/(m/s2)
1 Hz∼ 6500 Hz
10.5 grams |
|
| |
| |
| |
|
衝擊用加速規
|
| |
 |
SHOCK
ACCELEROMETERS
•Pyroshock Studies
•Pile Driver Monitoring
•Metal-to-Metal Impacts
•Space Vehicle Separation Studies
•Package and Drop Testing
•Ballistic Projectile Impacts
•Payload Survivability Testing
•Package Durability Testing
SHOCK
ACCELEROMETERS
• Measurements to 100,000 g
(1,000,000 m/s2)
• Optional built-in electrical
and mechanical filtering
• Individually qualified with
high- amplitude Hopkinson Bar
test
• ICP® and charge mode versions
|
|
| |
|
|
|
| 350B21 |
350B02 |
350B03 |
0.05 mV/g
0.005 mV/(m/s2)
1 Hz∼10k Hz
100,000 grange
|
0.1 mV/g
0.01 mV/(m/s2)
4 Hz∼10k Hz
50,000 grange |
0.5 mV/g
0.05 mV/(m/s2)
0.4 Hz∼10k Hz
10,000 grange |
|
| |
| |
| |
|
高溫環境加速規
|
| |
HIGH-TEMPERATURE
ACCELEROMETERS
- High-Temperature Vibration
and Shock Measurements
- Environmental Chambers
- Engine Vibration Measurements
- Hot Machinery
- Thermodynamic and Heat
Transfer Equipment
- Motor, Pump, and Compressor
Vibration Studies
|
 |
|
| |
|
|
|
|
 |
| 357B71 |
357B61 |
356A71 |
357A09 |
357B03 |
10 pC/g
1.02 pC/(m/s2)
Response to 2k Hz
-65 to +900 °F
-54 to +482 ℃ |
10 pC/g
1 pC/(m/s2)
Response to 5k Hz
-65 to +900 °F
-54 to +482 ℃ |
10 pC/g
1 pC/(m/s2)
Response to 7k Hz
-95 to +490 °F
-71 to +254 ℃ |
1.7 pC/g
0.17 pC/(m/s2)
Response to 13k Hz
-100 to +350 °F
-73 to +177 ℃ |
10
pC/g
1 pC/(m/s2)
Response to 12k Hz
-95 to +500 °F
-17 to +260 ℃ |
| CHARGE
OUTPUT ACCELEROMETERS |
- Compatible with charge
amplifiers and in-line charge
converters
- Extended operating temperature
ranges to 900 °F (482 °C)
- Extended operating temperature
ranges to 900 °F (482 °C)
|
|
| |
| |
| |
|
低頻電容式加速規
|
| |
| DC
RESPONSE CAPACITIVE ACCELEROMETERS |
- Ride Analysis
- Structural Analysis
- Robotics
- Uniform and Low-Frequency
Acceleration
- Inclination or Tilt
- Slow-Rotating Machinery
- Foundation Monitoring
- Platform Motion Control
- Space Vehicle Stability
Control
|
|
|
| 080A152 |
3701D3FA20G |
3701G3FA3G |
| Easy
mount dip |
20g
(196m/s2) range
0 to 500 Hz |
3g
(29m/s2) range
0 to 150 Hz |
|
|
| |
| FEATURES
AND BENEFITS OF CAPACITIVE ACCELEROMETERS |
- Highly stable, capacitive
sensing element
- Shock protection to 3000
g (30k m/s2)
- Electrically ground isolated
- Response from DC to 1000
Hz for low-frequency, uniform,
and static acceleration measurements
- Measurements from 30 μg
to 200 g (300 μm/s2 to 2000
m/s2)
- Laser welded, hermetically
sealed housings
- Lightweight titanium construction
- As low as 5 VDC excitation
for battery-operated use
- Single axis, triaxial,
and integral cable versions
|
|
|
Series 3703
|
3801D3FB20G |
Triaxial
capacitive
accelerometers
Imtegral cable or
9-pin connectors |
20g
(196m/s2) range
0 to 400 Hz
Ryton housing
Low cost |
|
| Capacitive
accelerometers utilize an opposed
plate capacitor as their sensing
element. A capacitance shift,
caused by the deflection of a
spring-mass as it is influenced
by acceleration, provides precision
measurements at low amplitude
levels and low frequencies to
DC. This design is inherently
rugged, stable, and immune to
cross axis influences. |
|
| |
|
HALT-HASS-ESS加速規 |
HALT
– HASS – ESS ACCELEROMETERS
- Survive extreme temperature limits
and rapid thermal cycling
- Survive extreme, random vibration
levels
- High performance shear mode designs
- Charge mode and ICP® types
|
 |
 |
| 300A12 |
320C20 |
352B30 |
Charge
mode bit indudes
accelerometer, cable,
and charge converter
10 mV/g system sensitivity
1mV( m/s2)
10 ∼ 10 k Hz
-100 to +500 °F
-73 to +260℃ |
Quartz
element
10 mV/g
1mV( m/s2)
1.5 ∼ 18 k Hz
-100 to +325 °F
-73 to +163 |
Ceramic
element
10 mV/g
1mV( m/s2)
10 to 6000 Hz
-65 to 250 °F
-54 to +121℃ |
|
| |
| |
| |
|
加速規校正器
|
| HANDHELD
SHAKER
- Battery or line powered
- Tests accelerometers weighing
up to 210 grams
- Auto shut-off
|
 |
| 1394C06 |
1
g (9.81 m/s2) pk or rms
159.2 Hz |
|
|
| |
| |
| |
|
敲擊鎚
|
MODALLY
TUNEDR ICP® IMPACT HAMMERS
AND KITS
- Structural Stimulus and
Impulse Response Measurements
- Investigation of Machinery
Vibration Problems
- Resonance Determination
- Modal Analysis
- “Bump” Testing
|
|
|
 |
 |
| Typical Hammer kit |
086C03 |
| |
10mV/lb (2.2mV/N) sersitivity
8000 Hz frequency range
0.34lb (0.16kg) hammer mass |
|
